在Lazar微型PH電*成功使用后，Lazar研究實驗室有限公司開發了一系列的微離子電*，它們至今被全世界各個研究中心使用。我們的離子電*可測量*低10微升
特點：
1、靈敏度高：大多數低于1 ppm的離子都可以被測量。一些離子如銅(+2)檢測范圍可*低達到十億分之一。
2、快速回應時間：由于薄膜的上等設計，選擇離子參數時，離子濃度變化的響應速度非常快，典型的響應速度時間是30秒。
3、寬泛的濃度范圍：電*偵查離子的范圍在百萬分之一至幾千ppm。一些電*可以檢測1摩爾的濃度。
4、抗體：電*可以使用在酸、堿和一些溶劑中。
5、便于攜帶的：不需要回到實驗室，可以當場測量。
6、小樣本測量：可測量10微升的小樣本。
7、閱讀快速輕松：電*可以與任何手提式打字機或者實驗室PH毫伏表使用。
8、直接銜接：我們的電*可以直接插入你的PH 毫伏表。不存在不兼容問題。
一些離子電*可用于核磁共振管：
完整的微型離子測量系統集測量、記錄、制圖于一體。系統包括：計量儀、離子電*、**電腦制圖軟件。
Micro Ion Electrodes
After the success of the Lazar micro pH electrode, Lazar Research Laboratories, Inc. developed a series of micro ion electrodes which are used today by research centers worldwide. Our micro ion electrodes measure ions down to 10 micro liters.
Features:
High Sensitivity: Most ions can be measured to below 1 ppm. Some ions such as copper (+2) can be measured down to the low part per billion range.
Fast response time: Due to membrane design parameters ion selective have a rapid response to changing ionic concentration. Response time of 30 seconds is typical.
Broad concentration range: Electrodes will detect ions down to the low part per million range up to several thousand ppm. Some of the electrodes will measure up to a concentration of 1 Molar.
Resistant Body: Makes electrodes usable in acids, bases and some solvents.
Portable: On-the-spot field measurements can be made without a trip back to the laboratory.
Small Samples: Measures samples as small as 10 micro liters.
Quick and Simple Readings: The electrodes can be used with any portable or laboratory pH/millivolt meter.
Direct Plug: Our electrodes plug directly into your pH/millivolt meter. No compatibility problems.
Some micro ion electrodes also available for NMR tubes - see below
Scroll further for ion specifications ------------------------------------------->
** Add -XS to catalog numbers for system catalog numbers
|
Electrode type
|
Cat. No.
|
Measurement
Range (M)
|
Concentration
Range(PPM)
|
pH Range
|
Temp. Range (oC)
|
Interferences
|
|
Ammonia
|
LGS-136NHM
|
5exp-7 to 1.0
|
0.01 to 17,000
|
above 11
|
0 to 50
|
volatile aminues
|
|
Bromide
|
LIS-146BRCM
|
5exp-6 to 1.0
|
0.4 to 79,000
|
2 to 14
|
0 to 80
|
S-, I-, CN-, high levels of CL- and NH3
|
|
Cadmium *
|
LIS-146CDCM
|
1exp-7 to 1exp-1
|
0.01 to 11,200
|
2 to 12
|
0 to 80
|
Ag+, Hg+2, Cu+2
|
|
Calcium *
|
LIS-146CACM
|
5exp-6 to 1.0
|
0.2 to 40,000
|
3 to 10
|
0 to 50
|
Pb+2, Hg+2, Cu+2, Ni+2
|
|
Carbon Dioxide
|
LGS-136COM
|
exp-2 to exp-4
|
4.4 to 440
|
4.8 to 5.2
|
0 to 50
|
Volatile weak acids
|
|
Chloride
|
LIS-146CLCM
|
5exp-6 to 1.0
|
1.8 to 35,500
|
2 to 12
|
0 to 80
|
S-2, I-, CM-, Br-
|
|
Copper
|
LIS-146CUCM
|
1exp-8 to 1exp-1
|
0.0006 to 6,350
|
2 to 12
|
0 to 80
|
Ag+, Hg+2
|
|
Cyanide
|
LIS-146CNCM
|
5exp-6 to 1exp-2
|
0.13 to 260
|
11 to 13
|
0 to 80
|
S-2, I-, Br-, Cl-
|
|
Iodide
|
LIS-146ICM
|
5exp-8 to 1.0
|
0.006 to 127,000
|
0 to 14
|
0 to 80
|
S-2, CN-, Br-, Cl-
|
|
Lead *
|
LIS-146LICM
|
1exp-6 to 1exp-1
|
0.2 to 20,700
|
3 to 8
|
0 to 80
|
Ag+, Hg+2, Cu+2, high levels Cd+2 and Fe+2
|
|
Nitrate *
|
LIS-146NOCM
|
7exp-6 to 1.0
|
0.6 to 62,000
|
2.5 to 11
|
0 to 50
|
ClO4-, I-, CN-, BF4-
|
|
Potassium *
|
LIS-146KCM
|
1exp-6 to 1.0
|
0.04 to 39,000
|
2 to 12
|
0 to 50
|
Cs+, NH4+
|
|
Silver/sulfide
|
LIS-146AGSCM
|
1exp-7 to 1.0
|
AG = 0.01 to 107,900
S = 0.003 to 32,100
|
2 to 12
|
0 to 80
|
Hg+2, Hg+
|
|
Sodium *
|
LIS-146NACM
|
1exp-6 to saturated
|
0.2 to 23,000
|
5 to 12
|
0 to 80
|
H+, K+, Li+, Ag+, Cs+, Tl+
|
|
|
|
|
Micro Reference Electrode (purchased separately)
|
LIS-146DJM
|
N/A
|
2 to 12
|
0 to 80
|
None
|
|
|
|
|
|
|
|
|
|
|
Micro electrodes for NMR tubes
The following electrodes are available with extra long stem for measurement within NMR tubes. These ion selective electrodes for NMR can be purchased by themselves or part of a complete system.
** Add -XS to catalog numbers for system catalog numbers
|
Electrode Type
|
Cat. No.
|
|
Chloride
|
LIS-146CLNMR
|
|
Cyanide
|
LIS-146CNNMR
|
|
Iodide
|
LIS-146INMR
|
|
Silver/Sulfide
|
LIS-146AGSNMR
|